Our mini Warm White LED Neon Flex 3000K 10x6mm offers a non-spotting, fully diffused light output. The splashproof silicon coating is fully flexible with a bend radius of up to 30mm, making it ideal for use in signage and display installations both indoors and outdoors. It is cuttable every 2.5cm, super bright with 280LEDs per metre.

10x6mm Neon Fles is Top Bending or Vertical Bending

10x6mm Micro Neon Flex is a high-quality lighting solution designed primarily for furniture lighting. It has a silicone outer casing which means it is both durable and flexible and allows it to easily fit into a correctly sized routed groove, making for a flush, seamless finish to your installation.

Neon Flex is a durable fully diffused linear light perfect for furniture installations thanks to it’s ultra slimline micro profile. This neon can be cut easily to your desired lengths at the allocated cut points. Maximum length at any time is 10 metres before visible voltage drops occur. You can get 20m continuous length, however, you need to power the led neon flex from both ends.

Whether you’re looking to light up a kitchen counter, accent a bookshelf, or brighten up a bathroom mirror, the 4x10mm Micro Neon Flex is the perfect choice for all your furniture lighting needs.

Its durable IP65 body allows for installations where light water exposure may occur, such as in a bathroom or kitchen.

Silicone cover has a high-quality finish that offers a longer life than standard PVC covers. You can rest assured that the Silicone cover will last longer and not discolour like PVC covers.

This LED light with its neon effect and flexible composition has a visually attractive and innovative design that’s perfect for any Home, Office or setting. They have a high level of versatility that allows you to bend and shape the light into almost any shape or form.

Our 10×6 Micro Neon Flex comes with a 2-year guarantee as standard on indoor installations.

Includes LED Neon Flex only. No clips and adapters include

The electrical components in the LED Strip are covered with Silicone. It is perfectly protected against dust and moisture which contributes to its IP65 protection factor and makes this type of LED lighting perfect not only for indoor but also for outdoor use (light splashes of water).

Note: Should not be fully exposed to outdoor weather, for full outdoor use please use IP67 or IP68 Neon Flex DC Voltage)

Driver Requirements:
1 metre > 9
2 metre > 20w
3 metre > 30w
4 metre > 40w
5 metre > 50w
6 metre > 60w
7 metre > 70w
8 metre > 80w
9 metre > 90w
10 metre > 100w

*For outdoor use, Heat Shrink and silicone gel must be applied at the Front and End Cap to protect the Strip against water damage. If the plug and End Cap is to be used outside, Waterproof sealant or Waterproof casing use is highly recommended. Incorrect Ingress Protection and incorrect use of a Transformer will void the warranty. Please contact us for outdoor use assistance. These lights are DC Voltage and cannot be connected directly to 110 – 240V AC without the use of a Transformer.

Specification:
Voltage – DC 24V
Dimensions – 10mm x 6mm
LED Type – SMD2835
Number Of LEDs – 280 Per Metre
Unit/Cut Length – 2.5cm (25mm)
Max Load – 10 Metre
LED Distance – 5mm
Power – 9W Per Metre
Lumens – 870 Per Metre
Jacket Type: Flat Shape
Splashproof, subject to correct installation.
Bent Angle – 3cm
Warranty: 2 Year
Certirication: CE & ROHs
Bending: Vertical / Top bending